Meine Merkliste  

972 Aktuelle Fachpublikationen zum Thema temperature

mit folgenden Suchkriterien:

Determination of the Critical Properties of C6–C10 n-Alkanes and Their Binary Systems Using a Flow Apparatus

13.10.2014 | Yang Liu; Ying Zhang; Mao-gang He; Nan Xin, Journal of Chemical & Engineering Data, 2014

A flow apparatus was established to measure the critical properties of pure components and mixtures. The critical points are visually determined by observing the critical opalescence. The measurement can be carried out up to 10 MPa for pressure and 773 K for temperature. Critical temperatures ...


Design Options for Avoiding Hydrates in Deep Offshore Production

10.10.2014 | Carlos A. B. R. Cardoso; Marcelo A. L. Gonçalves; Ricardo M. T. Camargo, Journal of Chemical & Engineering Data, 2014

Hydrate blockage in subsea systems is responsible for a portion of lost profits in several deepwater oil fields. This problem tends to worsen in the fields recently discovered in Brazilian Pre-Salt layer due to greater water depth, higher pressure, lower temperature, and oil more prone to ...


The Combined Effect of Thermodynamic Promoters Tetrahydrofuran and Cyclopentane on the Kinetics of Flue Gas Hydrate Formation

08.10.2014 | Nagu Daraboina; Nicolas von Solms, Journal of Chemical & Engineering Data, 2014

Carbon dioxide (CO2) capture through hydrate crystallization is a promising method among the new approaches for mitigating carbon emissions into the atmosphere. In this work, we investigate a combination of tetrahydrofuran (THF) and cyclopentane (CP) on the kinetics of flue gas (CO2:20 mol %/N2) ...


Density, Viscosity, Speed of Sound, Bulk Modulus, Surface Tension, and Flash Point of Binary Mixtures of n-Hexadecane + Ethylbenzene or + Toluene at (293.15 to 373.15) K and 0.1 MPa

06.10.2014 | Dianne J. Luning Prak; Jim S. Cowart; Andrew M. McDaniel; Paul C. Trulove, Journal of Chemical & Engineering Data, 2014

In this work, the physical properties of binary mixtures of n-hexadecane with toluene or ethylbenzene were measured. Density and viscosity were measured at temperatures ranging from (293.15 to 373.15) K, and the speed of sound was measured at temperatures ranging from (293.15 to 333.15) K. ...


Volumetric Properties of Binary Mixtures of 1-Butyl-3-Methylimidazolium Tris(pentafluoroethyl)trifluorophosphate with N-Methylformamide, N-Ethylformamide, N,N-Dimethylformamide, N,N-Dibutylformamide, and N,N-Dimethylacetamide from (293.15 to 323.15) K

03.10.2014 | Milan Vraneš; Aleksandar Tot; Nebojša Zec; Snežana Papović; Slobodan Gadžurić, Journal of Chemical & Engineering Data, 2014

Volumetric properties of 1-butyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate ([BMIM][FAP]) ionic liquid binary mixtures with two protic amides: N-methyl-formamide (NMF) and N-ethylformamide (NEF), and three aprotic amides: N,N-dimethylformamide (DMF), N,N-dibutylformamide (DBF), ...


Density, Surface Tension, and Cloud Point of Aqueous Solutions of β-Cyclodextrin-polyethylene Glycol

02.10.2014 | Yuan Liu; Changjun Zou; Taiyang Wang; Ming Li, Journal of Chemical & Engineering Data, 2014

The physical property data (density, surface tension, and cloud point) for aqueous solutions of β-cyclodextrin-polyethylene glycol have been determined at temperatures from (293.15 to 313.15) K and atmospheric pressure. Results show that the density and surface tension decrease as the temperature ...


Experimental Measurement and Modeling of Solubility Data for 2,3-Dichloronitrobenzene in Methanol, Ethanol, and Liquid Mixtures (Methanol + Water, Ethanol + Water)

02.10.2014 | Rongrong Li; Bin Zhang; Ling Wang; Ganbing Yao; Yingjie Zhang; Hongkun Zhao, Journal of Chemical & Engineering Data, 2014

The solubilities of 2,3-dichloronitrobenzene in aqueous solutions of methanol and ethanol with various concentrations were determined at temperatures ranging from (278.15 to 303.15) K under atmospheric pressure of 0.1 MPa. The solubility of 2,3-dichloronitrobenzene increases with increments in ...


Comparison Study on Temperature Dependence of the Interfacial Tension of n-Alkane–Water and n-Alcohol–Water Two Binary Systems

01.10.2014 | Yiling Tian; Liqian Cao; Lijuan Qiu; Rongjiao Zhu, Journal of Chemical & Engineering Data, 2014

A pendant drop shape technique, enhanced by video-image digitization, was applied to measure the interfacial tension for n-alkane–water and n-alcohol–water of 6–9 carbon atoms binary systems at the temperature of 293.2 to 343.2 K. The experimental results of interfacial tension measured by this ...


Design of a Gamma Densitometer for Hydrocarbon Fuel at High Temperature and Supercritical Pressure

01.10.2014 | Zhuqiang Yang; Qincheng Bi; Yong Guo; Zhaohui Liu; Jianguo Yan; Qiang Zhang, Journal of Chemical & Engineering Data, 2014

The densities of endothermic hydrocarbon fuel at supercritical pressure condition are measured online using a radial measurement method. The densitometer is based on the attenuation theory of gamma ray using a count rate mode. One advantage of the method is that it is noninstrusive and practical ...


New “Magmolecular” Process for the Separation of Antimony(III) from Aqueous Solution

29.09.2014 | Ali Asghar Rooygar; Mohammad Hassan Mallah; Hossein Abolghasemi; Jaber Safdari, Journal of Chemical & Engineering Data, 2014

In this work, the separation potential of a new “magmolecular” process for ions of antimony(III) from wastewater was studied. The magmolecular process is a technique in which a high gradient magnetic field is applied to eliminate heavy metal from wastewater. In this process, specifically we have ...


Seite 1 von 98
Suche per e-Mail abonnieren

Sie erhalten passend zu Ihrer Suche die neusten Suchergebnisse per E-Mail. Dieser Service ist für Sie kostenlos und kann jederzeit abbestellt werden.

Ihr Bowser ist nicht aktuell. Microsoft Internet Explorer 6.0 unterstützt einige Funktionen auf Chemie.DE nicht.