Meine Merkliste
my.chemie.de  
Login  

Materials, Vol. 11, Pages 838: 2.45 GHz Microwave Processing and Its Influence on Glass Fiber Reinforced Plastics

Materials, Vol. 11, Pages 838: 2.45 GHz Microwave Processing and Its Influence on Glass Fiber Reinforced Plastics

Materials doi: 10.3390/ma11050838

Authors: Daniel Teufl Swen Zaremba

During the production of fiber-reinforced composite materials, liquid resin is introduced into the fiber material and cured, i.e., hardened. An elevated temperature is needed for this curing. Microwave curing of composites has been investigated for some time, but it has mostly been done using small domestic or laboratory equipment. However, no investigation has been carried out using an industrial-sized chamber-microwave for glass fiber-reinforced plastic (GFRP). Here, we show that microwave curing produces laminates of the same quality as oven-cured ones. The study shows that, if the process is done right, GFRP samples can be produced with an industrial scale microwave. Even if not fully cured, microwave samples show a glass transition temperature measured with DMA (Tg-DMA) that is comparable to the Tg-DMA according to the proposed cure cycle on the data sheet. Specific microwave-cured configurations show better inter-laminar shear strength than oven specimens. The results show that microwave-based heat introduction can be a beneficial curing method for GFRP laminates. A microwave-optimized process is faster and leads to better mechanical properties.

Autoren:   Teufl, Daniel ; Zaremba, Swen
Journal:   Materials
Band:   11
Ausgabe:   5
Jahrgang:   2018
Seiten:   838
DOI:   10.3390/ma11050838
Erscheinungsdatum:   18.05.2018
Mehr über Molecular Diversity Preservation International
Ihr Bowser ist nicht aktuell. Microsoft Internet Explorer 6.0 unterstützt einige Funktionen auf Chemie.DE nicht.